+1 (770) 421 6195

Gutter Toppers

1. Clean any and all debris from the entire gutter system.
2. If reusing existing gutters, install the hidden gutter guard hanger.
3. Measure the pitch of the roof and brake cover to the pitch of the roof. Gutter cover must extend out flat over the top of the gutter
from the edge of the roof over the front of the gutter.
4. Install rear pitched section under second row of shingles.
5. Fasten the front of the gutter guard to the hanger with a zip screw.
6. Screw down the rear of the cover under the center of the roof tab every three feet with rust resistant deck screws. (Do not place screws
near water table!)
7. Dab gutter sealant onto the tops of the screw heads to seal screws and reseal roof tab.
8. Overlap each GutterGuard section by one inch and fasten with zip screws.
9. Put end caps on ends to close system.

*Easy to install
*Training available
*Available in many colors
*Nose forward design > prevents clogging
*Lifetime guaranteed product
*Can be installed on existing gutters
*Exclusive, pattented universal hanger installs gutter and cover
*Can be installed on metal, slate roofs, and wood shakes
*Comes complete with matching screws and rust resistant decking screws

The Ultimate Leaf Guard